Chlorine (Cl2) gas detector

Fixed chlorine (Cl2) detectors for water treatment and disinfection, swimming pools and chlorine storage rooms: electrochemical cell, 0-10 ppm, 4-20 mA outputs, Modbus and relays depending on the model. Choose the model below to see its specifications and options.

Request a quote

SKU: N/A Category:
Description

Fixed chlorine (Cl2) detectors for water treatment and disinfection, swimming pools and chlorine storage rooms: electrochemical cell, 0-10 ppm, 4-20 mA outputs, Modbus and relays depending on the model.

Why detect chlorine?

Chlorine gas is used to disinfect drinking water, process water and swimming pool water. It is a very toxic and irritant gas, heavier than air, which collects in cylinder and chlorinator rooms. Fixed detection raises the alarm and can control the ventilation or close the valves.

The sensor

Electrochemical cell, 0-10 ppm range, 0.1 ppm resolution, operation from −20 to +50 °C, lifetime over 1 year, checked every 6 months.

Where to install a chlorine detector?

Close to the floor, near cylinders, chlorinators and joints, with a remote alarm outside the room.

Available models

Model Sensor Ranges Housing Outputs Local alarm
E2638-Cl2 electrochemical 0-10 ppm grey ABS, IP65, 90 × 145 × 55 mm 2 × 4-20 mA / 0-10 V, RS485 Modbus RTU optional: 2 relays 5 A, LEDs and 85 dB buzzer or LCD display
E2639-Cl2 electrochemical 0-10 ppm grey ABS, IP65, 190 mm wide 2 × 4-20 mA, RS485 Modbus RTU, optional WiFi 3 relays (pre-alarm, alarm, fault), 4 LEDs, 85 dB buzzer, 2 × 24 V beacon outputs
E2608-Cl2 electrochemical 0-10 ppm grey ABS, IP65, 87 × 82 × 55 mm, wall or duct 2 × 4-20 mA / 0-10 V, RS485 Modbus RTU 2 SPST relays 5 A
E2618-Cl2 electrochemical 0-10 ppm grey ABS, IP65, 82 × 80 × 55 mm, wall or duct 2 × 4-20 mA / 0-10 V, RS485 Modbus RTU none: alarm handled by the PLC
E2648-Cl2 electrochemical 0-10 ppm die-cast aluminium, IP66, 120 × 125 × 57 mm 2 × 4-20 mA / 0-10 V, RS485 Modbus RTU optional 2 SPST relays 5 A

Choose the model in the list at the top of the page to see all its specifications and options. Other measuring ranges are available on request.

Alarm and options by model

  • E2638 : optional: 2 relays 5 A, LEDs and 85 dB buzzer or LCD display ; relays, buzzer and LEDs, built-in or remote LCD display (0 to +50 °C), self-test button, 3 m remote probe, 90-265 VAC.
  • E2639 : 3 relays (pre-alarm, alarm, fault), 4 LEDs, 85 dB buzzer, 2 × 24 V beacon outputs ; WiFi with web server, replaceable pre-calibrated GSH sensor, 2.5 or 5 m remote probe (GSH version).
  • E2608 : 2 SPST relays 5 A ; duct version, 3 m remote probe, 24 VAC or 230 VAC.
  • E2618 : none: alarm handled by the PLC ; duct version, 3 m remote probe.
  • E2648 : optional 2 SPST relays 5 A ; relays, 3 m remote probe, 24 VAC or 230 VAC.

Request a quote

Afric Froid supplies and installs Evikon gas detectors with its refrigeration systems in Tunisia, Algeria, Senegal and Côte d’Ivoire. Tell us the room, its temperature, the number of points to monitor, the power supply and how the alarm should be given: we select the model and send you a quote.

See all our gas detectors and sensors.

Additional information
ModelE2638-Cl2 · multi-option IP65, E2639-Cl2 · 3 relays, buzzer, E2608-Cl2 · 2 relays, wall/duct, E2618-Cl2 · transmitter, no relays, E2648-Cl2 · aluminium IP66
Documentation

Official Evikon documents, kept up to date by the manufacturer: