Insulated sandwich panels, cold room doors and industrial insulation by Afric Froid: HACCP-certified PIR, PUR and rock wool. Tailored design and installation.

Achieve a fully sealed thermal envelope, eliminate thermal bridges and protect your cold storage buildings with our certified sandwich panel solutions.

Contact Our Experts
constant temperatures

Insulation: Your First Line of Energy Savings

In any industrial refrigeration or temperature-controlled storage project, the quality of the insulated envelope is paramount. Poorly sized or poorly installed insulation leads to major heat gains, condensation on walls and permanent over-consumption by your refrigeration racks.
At Afric Froid, we supply and install complete insulation systems and insulated sandwich panels for chilled cold rooms, frozen stores down to -40°C, clean rooms and processing areas. Our solutions meet the strictest hygiene (HACCP) and fire safety requirements.

Our Insulated Sandwich Panel Ranges

We offer different thicknesses (40 mm to 200 mm) and insulating cores depending on operating temperatures and regulatory constraints.

Polyisocyanurate (PIR) & Polyurethane (PUR) Panels

Features: High-density rigid foam injected between two pre-painted steel facings.

Applications: Chilled cold rooms, frozen logistics warehouses, freezing tunnels.

Benefits: Excellent thermal performance, high mechanical strength and improved fire reaction class (PIR)

Rock Wool Panels (Non-Combustible Insulation)

Features: High-density oriented mineral fibre core.

Applications: High fire-risk areas, fire walls (EI60 to EI120), battery charging rooms and public areas.

Benefits: Fully non-combustible (A2-s1,d0), with enhanced sound insulation and insulating properties maintained at very high temperatures.

Special Coatings & Facings

Polyester / Plastisol pre-painted steel: Standard food-industry use, pressure-washable.

Stainless steel (304L / 316L): For highly corrosive environments, meat processing, the marine sector and curing.

Food-grade PET / PVC coating: Highly resistant to scratches and to acid or chlorinated detergents.

Cold Room Doors & Insulated Joinery

An insulated enclosure is only as airtight as its access points

Sliding & Hinged Doors

Lightweight or reinforced insulated doors for chilled and frozen temperatures (with anti-freeze heater cables built into the frame).

Automatic High-Speed Roll-Up Doors

Ideal for limiting warm-air ingress in areas with heavy pallet-truck traffic.

Flexible Swing Doors & PVC Strip Curtains

Low-cost draught barriers for loading-bay airlocks and busy passageways.

Floors, Flashings & Finishing Accessories

Complete cold storage insulation requires careful treatment of construction details

Floor Insulation & Anti-Frost Systems

Extruded polystyrene (XPS) boards laid under the slab, with ventilation ducts or underfloor heater cables to prevent the subsoil from freezing.

Angles & Rounded Coving

PVC or stainless steel profiles that prevent dirt build-up in corners, essential for passing hygiene audits.

Impact Protection & Stainless Kick Plates

Wall-base protection against forklift impacts.

Why Choose Afric Froid for Your Insulation?

Design & Calculations by Our Engineering Office

Precise calculation of heat transfer and required thicknesses by our `{`Engineering & Design Office`}`.

Installation by Specialist Fitters

Installation teams skilled in treating thermal bridges, thermally broken panel joints and food-grade silicone sealing.

A Complete Package

One provider for insulation together with the installation of `{`Cold Rooms`}` and `{`Refrigeration Racks`}`.

Insulate Your Cold Storage Buildings

Building a warehouse, refitting a cutting room or replacing your cold room doors? Our technicians carry out on-site surveys to provide a detailed quantity take-off.
Contact Our Experts