Sulphur hexafluoride (SF6) gas detector
Fixed sulphur hexafluoride (SF6) detectors for high-voltage substations and gas-insulated switchgear: dual-beam NDIR infrared sensor, 0-1,000 ppm, lifetime over 5 years. Choose the model below to see its specifications and options.
Fixed sulphur hexafluoride (SF6) detectors for high-voltage substations and gas-insulated switchgear: dual-beam NDIR infrared sensor, 0-1,000 ppm, lifetime over 5 years.
Why detect SF6?
Sulphur hexafluoride insulates high-voltage circuit breakers and switchgear. It is not toxic, but it is much heavier than air: a leak can displace oxygen in cable trenches and basement rooms. It is also a very potent greenhouse gas whose leaks must be found.
The sensor
Dual-beam NDIR infrared sensor, 0-1,000 ppm range, 1 ppm resolution, response time under 30 s, operation from −20 to +50 °C, lifetime over 5 years. Factory low set-point at 100 ppm.
Where to install an SF6 detector?
At floor level, near the switchgear and in cable trenches and low points.
Available models
| Model | Sensor | Ranges | Housing | Outputs | Local alarm |
|---|---|---|---|---|---|
| E2638-SF6 | dual-beam NDIR infrared | 0-1,000 ppm | grey ABS, IP65, 90 × 145 × 55 mm | 2 × 4-20 mA / 0-10 V, RS485 Modbus RTU | optional: 2 relays 5 A, LEDs and 85 dB buzzer or LCD display |
| E2639-SF6 | dual-beam NDIR infrared | 0-1,000 ppm | grey ABS, IP65, 190 mm wide | 2 × 4-20 mA, RS485 Modbus RTU, optional WiFi | 3 relays (pre-alarm, alarm, fault), 4 LEDs, 85 dB buzzer, 2 × 24 V beacon outputs |
Choose the model in the list at the top of the page to see all its specifications and options. Other measuring ranges are available on request.
Alarm and options by model
- E2638 : optional: 2 relays 5 A, LEDs and 85 dB buzzer or LCD display ; relays, buzzer and LEDs, built-in or remote LCD display (0 to +50 °C), self-test button, 3 m remote probe, 90-265 VAC.
- E2639 : 3 relays (pre-alarm, alarm, fault), 4 LEDs, 85 dB buzzer, 2 × 24 V beacon outputs ; WiFi with web server, replaceable pre-calibrated GSH sensor, 2.5 or 5 m remote probe (GSH version).
Request a quote
Afric Froid supplies and installs Evikon gas detectors with its refrigeration systems in Tunisia, Algeria, Senegal and Côte d’Ivoire. Tell us the room, its temperature, the number of points to monitor, the power supply and how the alarm should be given: we select the model and send you a quote.
See all our gas detectors and sensors.
| Model | E2638-SF6 · multi-option IP65, E2639-SF6 · 3 relays, buzzer |
|---|
Official Evikon documents, kept up to date by the manufacturer:
Related products
Ethylene (C2H4) gas detector
Hydrogen (H2) gas detector
Carbon monoxide (CO) gas detector
Fixed carbon monoxide (CO) detectors for car parks, loading bays, warehouses with combustion-engine forklifts and boiler rooms: electrochemical cell from 0-100 to 0-1,000 ppm, lifetime over 10 years. Relay and buzzer alarms, or 4-20 mA transmitters for ventilation control. Choose the model below to see its specifications and options.




