Oxygen (O2) gas detector

Fixed oxygen O2 detectors for controlled atmosphere stores and nitrogen, CO2 or inert gas rooms: 0-25 % vol measurement, oxygen deficiency alarm at 19.5 %, 2, 3 or 5-year electrochemical cell. Choose the model below to see its specifications and options.

Request a quote

SKU: N/A Category:
Description

Fixed oxygen O2 detectors for controlled atmosphere stores and nitrogen, CO2 or inert gas rooms: 0-25 % vol measurement, oxygen deficiency alarm at 19.5 %, 2, 3 or 5-year electrochemical cell.

The danger of oxygen deficiency

Air contains 20.9 % oxygen. When an inert gas (nitrogen, CO2, argon) displaces it, the drop can neither be seen nor smelled: below 19.5 % it is already called oxygen deficiency, and below about 10 % loss of consciousness can be very fast. Controlled atmosphere stores, nitrogen generator rooms, CO2 or dry ice storage and liquid nitrogen freezing rooms must therefore be equipped with oxygen detectors.

Controlled atmosphere: a production and safety measurement

In apple, pear or kiwi storage, the oxygen level of the room is deliberately lowered to a few per cent to slow down fruit respiration. The oxygen detector then has two jobs: it monitors the set-point during storage, and it protects the staff who must enter the room or work nearby. Combine it with a CO2 detector, the other gas of controlled atmosphere.

The Evikon sensor

  • electrochemical cell, 0-25 % vol measurement, 0.01 % resolution;
  • three lifetimes to choose from: over 2, 3 or 5 years (O2-3Y and O2-5Y codes);
  • operation from −30 to +50 °C, or −40 to +60 °C with the 5-year cell;
  • response time under 10 s; factory alarm at 19.5 % vol; checked every 6 months;
  • 4-20 mA / 0-10 V outputs, Modbus and relays depending on the series; the E2617 is a cost-effective single-output version for building management.

Where to install an oxygen detector?

Install it at breathing height (about 1.5 m) in rooms where people work, and near the floor if the gas that may displace oxygen is heavier than air, such as CO2. Fit a remote alarm at the room entrance so that nobody enters during an alarm.

Available models

Model Sensor Ranges Housing Outputs Local alarm
E2638-O2 electrochemical (2, 3 or 5-year cell) 0-25 % vol grey ABS, IP65, 90 × 145 × 55 mm 2 × 4-20 mA / 0-10 V, RS485 Modbus RTU optional: 2 relays 5 A, LEDs and 85 dB buzzer or LCD display
E2639-O2 electrochemical (2, 3 or 5-year cell) 0-25 % vol grey ABS, IP65, 190 mm wide 2 × 4-20 mA, RS485 Modbus RTU, optional WiFi 3 relays (pre-alarm, alarm, fault), 4 LEDs, 85 dB buzzer, 2 × 24 V beacon outputs
E2608-O2 electrochemical (2, 3 or 5-year cell) 0-25 % vol grey ABS, IP65, 87 × 82 × 55 mm, wall or duct 2 × 4-20 mA / 0-10 V, RS485 Modbus RTU 2 SPST relays 5 A
E2618-O2 electrochemical (2, 3 or 5-year cell) 0-25 % vol grey ABS, IP65, 82 × 80 × 55 mm, wall or duct 2 × 4-20 mA / 0-10 V, RS485 Modbus RTU none: alarm handled by the PLC
E2648-O2 electrochemical (2, 3 or 5-year cell) 0-25 % vol die-cast aluminium, IP66, 120 × 125 × 57 mm 2 × 4-20 mA / 0-10 V, RS485 Modbus RTU optional 2 SPST relays 5 A
E2617-O2 electrochemical 0-25 % vol ABS, IP65, 82 × 94 × 35 mm 1 × 4-20 mA or 0-10 V none: alarm handled by the PLC

Choose the model in the list at the top of the page to see all its specifications and options. Other measuring ranges are available on request.

Alarm and options by model

  • E2638 : optional: 2 relays 5 A, LEDs and 85 dB buzzer or LCD display ; relays, buzzer and LEDs, built-in or remote LCD display (0 to +50 °C), self-test button, 3 m remote probe, 90-265 VAC.
  • E2639 : 3 relays (pre-alarm, alarm, fault), 4 LEDs, 85 dB buzzer, 2 × 24 V beacon outputs ; WiFi with web server, replaceable pre-calibrated GSH sensor, 2.5 or 5 m remote probe (GSH version).
  • E2608 : 2 SPST relays 5 A ; duct version, 3 m remote probe, 24 VAC or 230 VAC.
  • E2618 : none: alarm handled by the PLC ; duct version, 3 m remote probe.
  • E2648 : optional 2 SPST relays 5 A ; relays, 3 m remote probe, 24 VAC or 230 VAC.
  • E2617 : none: alarm handled by the PLC ; none.

Request a quote

Afric Froid supplies and installs Evikon gas detectors with its refrigeration systems in Tunisia, Algeria, Senegal and Côte d’Ivoire. Tell us the room, its temperature, the number of points to monitor, the power supply and how the alarm should be given: we select the model and send you a quote.

See all our gas detectors and sensors.

Additional information
ModelE2638-O2 · multi-option IP65, E2639-O2 · 3 relays, buzzer, E2608-O2 · 2 relays, wall/duct, E2618-O2 · transmitter, no relays, E2648-O2 · aluminium IP66, E2617-O2 · low-cost transmitter
Documentation

Official Evikon documents, kept up to date by the manufacturer: