Danfoss ATEX BV024A 24 V AC coil (018Z6120)

Danfoss BV024A ATEX zone 2 certified coil for Danfoss solenoid valves: 24 V AC, 50 Hz, 11 W, 1 m cable, IP65. For systems running on propane R290, isobutane R600a or propylene R1270. Danfoss ref. 018Z6120.

The Danfoss BV024A is an ATEX zone 2 certified coil for Danfoss solenoid valves. It is designed for systems where an explosive atmosphere may occur, especially those running on propane R290, butane R600, isobutane R600a or propylene R1270. It connects with a 1 m 3-core cable and is fastened with a screw, for safe mounting.

Specifications

Supply 24 V AC, 50 Hz (tolerance −15% / +10%); power 11 W (21 VA); continuous duty (100%).
ATEX classification according to EN 60079: zone 2, equipment group II, category 3G, gas group IIB, temperature class T4, protection level Gc.
1 m cable, 3 × 0.75 mm²; the cable entry accepts a flexible steel hose.
IP65 enclosure; ambient temperature −40 to 50 °C; media temperature up to 100 °C.
Valves: EVR 2 to 40 (NC), EVR 6 to 22 (NO), EVRC, EVRA, EVRAT, EVRS, EVRST, EVM; MOPD up to 21 bar.

Important

Use only in a system that complies with ATEX.
Fit a fuse of no more than 2 A ahead of the coil.
Where regulations do not require it, Danfoss recommends a third-party approval of any system using a flammable refrigerant.

On request: BV110A 110 V (018Z6121), BV230A 230 V (018Z6122), BV240A 240 V (018Z6123), and at 60 Hz BV024B 24 V (018Z6125) and BV230B 230 V (018Z6127).

Outside ATEX zones, see our Danfoss clip-on coils.

Afric Froid, your Danfoss supplier

Afric Froid supplies Danfoss coils and solenoid valves, including for systems with flammable refrigerants, installs them and provides after-sales service in Tunisia, Algeria, Senegal and Ivory Coast. Ask us for a quote.