Danfoss ETS 6 electric expansion valve (ETS 6-08 to 6-40)

Danfoss ETS 6 stepper motor electric expansion valve, bi-flow, for display cases, cold rooms, air conditioning and heat pumps: 8 sizes from 1.1 to 27.6 kW with R404A. Choose your size below to see its specifications.

Request a quote

SKU: N/A Category:
Description

The Danfoss ETS 6 is a small stepper motor electric expansion valve for display cases, cold rooms, air conditioning and small heat pumps. Compact and lightweight, it controls injection precisely from 10 to 100% of its capacity and works in both flow directions, which suits reversible heat pumps. Eight sizes, from ETS 6-08 to ETS 6-40, cover 1.1 to 27.6 kW with R404A.

ETS 6 sizes

Size Orifice R404A R134a R410A Connections MOPD Single pack ref. Box of 100 ref.
ETS 6-08 0.8 mm 1.1 kW 1.2 kW 1.8 kW 1/4 in 35 bar 034G5095 034G5090
ETS 6-10 1.0 mm 1.8 kW 2.0 kW 3.1 kW 5/16 in 35 bar 034G5005 034G5000
ETS 6-14 1.4 mm 4.1 kW 4.5 kW 6.8 kW 5/16 in 35 bar 034G5015 034G5010
ETS 6-18 1.8 mm 7.3 kW 8.1 kW 12.1 kW 1/4 in 35 bar 034G5026 034G5024
ETS 6-25 2.5 mm 13.8 kW 15.3 kW 23.0 kW 5/16 in 35 bar 034G5035 034G5030
ETS 6-30 3.0 mm 18.9 kW 20.9 kW 31.5 kW 5/16 in 28 bar 034G5045 034G5040
ETS 6-32 3.2 mm 20.3 kW 22.5 kW 33.9 kW 5/16 in 28 bar 034G5055 034G5050
ETS 6-40 4.0 mm 27.6 kW 30.6 kW 46.0 kW 5/16 in 21 bar 034G5065 034G5060

Danfoss rated capacities: evaporating +5 °C, condensing 38 °C, no subcooling or superheat. Copper solder connections, angle way (90°). The box of 100 reference is intended for OEMs.

Key benefits

  • Precise control: 480 half-step stroke, stable control from 10 to 100% of capacity.
  • Bi-flow: works in both directions, for reversible heat pumps.
  • Proven reliability: tested by Danfoss for 60 million pulses and 30,000 full strokes.
  • Many refrigerants: R22, R32, R134a, R290, R404A, R407C, R407H, R410A, R448A, R449A, R452A, R452B, R454C, R463A, R513A and R1234yf (flammable refrigerants according to EN 378).
  • Compact: the coil clips onto the valve body and is ordered separately.

Common specifications

  • Maximum working pressure 47 bar; fluid and ambient temperature −30 to 70 °C; mineral and ester oils.
  • Unipolar permanent magnet stepper motor, 12 V DC coil, 0.26 A per phase, IP66.
  • 0 to 480 pulses (do not exceed 520), 30 to 90 pulses per second (31 recommended); full stroke in 16 s at 30 pps.
  • Coil on top, within 15° of vertical.

Coils and accessories

  • JST XHP-5 connector, to be used with a Danfoss controller: 0.7 m (034G5115), 1.5 m (034G5145), 2 m (034G5185) or 3 m (034G5135) cable.
  • JST XHP-6 connector: 0.7 m cable (034G5105). AMP UPC-6 connector: 0.6 m cable (034G5175).
  • Service: ETS 6 manual coil (034G5199) and AST-g service driver (034G0013).

To drive the valve, see our Danfoss EKE 1 superheat controller (EKE 1A, 1B or 1C).

Afric Froid, your Danfoss supplier

Afric Froid supplies Danfoss ETS electric expansion valves, their coils and controllers, installs them and provides after-sales service in Tunisia, Algeria, Senegal and Ivory Coast. Tell us the refrigerant, capacity and temperatures: we will choose the right size and send you a quote.

Additional information
ModelETS 6-08 – 1.1 kW (R404A), ETS 6-10 – 1.8 kW (R404A), ETS 6-14 – 4.1 kW (R404A), ETS 6-18 – 7.3 kW (R404A), ETS 6-25 – 13.8 kW (R404A), ETS 6-30 – 18.9 kW (R404A), ETS 6-32 – 20.3 kW (R404A), ETS 6-40 – 27.6 kW (R404A)
Documentation

Official Danfoss document for the ETS 6 valve, always in its latest version:

  • ETS 6 data sheet (PDF, 1.9 MB): sizes, capacities, coils, wiring, selection tables and dimensions.