Danfoss Optyma Slim Pack condensing unit - Afric Froid
Click to enlarge
20 L can of Fuchs RENISO TRITON SE 170 refrigeration oil
Fuchs RENISO TRITON SE 170 ester refrigeration oil – 20 L can
Back to products
Danfoss EKE 1A superheat controller
Danfoss EKE 1 superheat controller (1A, 1B, 1C)

Danfoss Optyma Slim Pack low temperature unit

Danfoss Optyma Slim Pack outdoor condensing unit for low temperature refrigeration (frozen cold rooms, freezers), with a Danfoss NTZ reciprocating or LLZ scroll compressor and a micro-channel condenser: 5 models, from 1.4 to 4.7 kW with R404A (−25 °C evaporating, 43 °C ambient), 230 V single-phase or 400 V three-phase depending on the model. Choose your model below, or the other range:

Medium temperature3.2–10.4 kW at −5 °CLow temperature1.4–4.7 kW at −25 °C

Request a quote

SKU: N/A Category:
Description

Optyma Slim Pack low temperature models

Model Compressor Power supply R404A −25 °C (43 °C amb.) R452A −25 °C (43 °C amb.) Power input Fan / air flow Receiver Connections Dimensions H × W × D Weight W04 codes
OP-LPQE048NT NTZ048 (reciprocating) 230 V / 400 V 1.4 kW 1.2 kW 1.6 kW Ø 460 mm · 5,000 m³/h 3.4 l 5/8″ / 1/2″ 690 × 1,087 × 464 mm 63 kg 114X7053 / 114X7054
OP-LPQE068NT NTZ068 (reciprocating) 230 V / 400 V 2.1 kW 1.9 kW 2.4 kW Ø 460 mm · 5,000 m³/h 3.4 l 5/8″ / 1/2″ 690 × 1,087 × 464 mm 65 kg 114X7055 / 114X7056
OP-LPQE067LL LLZ013 (scroll) 400 V 3.4 kW 3.0 kW 3.4 kW Ø 609 mm · 6,700 m³/h 6.2 l 3/4″ / 1/2″ 825 × 1,105 × 464 mm 100 kg 114X7057
OP-LPQE083LL LLZ015 (scroll) 400 V 4.0 kW 3.6 kW 3.9 kW Ø 609 mm · 6,700 m³/h 6.2 l 3/4″ / 1/2″ 825 × 1,105 × 464 mm 100 kg 114X7058
OP-LPQE097LL LLZ018 (scroll) 400 V 4.7 kW 4.2 kW 4.4 kW Ø 609 mm · 6,700 m³/h 6.2 l 3/4″ / 1/2″ 825 × 1,105 × 464 mm 101 kg 114X7059

Cooling capacities given by Danfoss at −25 °C evaporating and 43 °C ambient temperature, 10 K superheat (EN 13215 standard), for the three-phase version; the single-phase version is within ± 3%. Application range: −40 to −10 °C evaporating with R404A, R507 and R452A. Connections and codes of the W04 version. Source: Danfoss Optyma Slim Pack catalogue (AF245986497056). For another refrigerant or other temperatures, ask us to size it for you.

Each model comes in several equipment versions: W04, the standard version, with a full electrical box; W10, which adds a fan speed controller; W02, without electrical box, with a solenoid valve, for connection to your own control panel. All have service valves, receiver, filter drier, sight glass and KP dual pressure switch. The codes of each version are given with the selected model.

A unit ready for outdoor installation

The Optyma Slim Pack is delivered assembled, wired and factory-tested: just fix it, connect the piping and the power supply. Its IP54 housing resists weather and corrosion, and its micro-channel condenser is easy to clean and needs less refrigerant. The “E” version is designed for tropical and extreme ambient conditions up to 48 °C: a good choice for Tunisia, Algeria, Senegal and Ivory Coast.

Afric Froid, your Danfoss Optyma supplier

Afric Froid supplies Danfoss Optyma Slim Pack units, installs them and provides after-sales service. Tell us the cold room temperature, the load to be cooled and the maximum outdoor temperature: we will choose the right model and send you a quote. To estimate the capacity you need, use our cold room heat load calculator.

Additional information
ModelOP-LPQE048NT – 1.4 kW (R404A) – 230 V, OP-LPQE048NT – 1.4 kW (R404A) – 400 V, OP-LPQE068NT – 2.1 kW (R404A) – 230 V, OP-LPQE068NT – 2.1 kW (R404A) – 400 V, OP-LPQE067LL – 3.4 kW (R404A) – 400 V, OP-LPQE083LL – 4.0 kW (R404A) – 400 V, OP-LPQE097LL – 4.7 kW (R404A) – 400 V
Documentation

Official Danfoss documents for the Optyma Slim Pack:

  • Danfoss Optyma Slim Pack page: up-to-date catalogue, data sheets, installation guides and wiring diagrams.
  • Danfoss Coolselector®2 selection software: detailed capacities for all refrigerants and temperatures.

Need a selection for other conditions? Ask us to size it for you.