AFRICHILLER scroll water chiller, 20 to 320 kW

Afric Froid AFRICHILLER air-cooled water chiller: 10 models from 20 to 320 kW, with 1 to 4 Danfoss SZ scroll compressors and one circuit per compressor, using R407C or R134a. Capacity at 12/7 °C water and 38 °C air, COP above 3. Choose your model below to see its specifications.

Request a quote

SKU: N/A Category:
Description

The AFRICHILLER is Afric Froid’s air-cooled scroll water chiller. It comes in 10 standard models from 20 to 320 kW, with 1 to 4 Danfoss SZ scroll compressors, each on its own refrigerant circuit: if one circuit stops, the others keep producing. Capacities are given for water from 12 to 7 °C and 38 °C outdoor air, a harder condition than the 35 °C of the EN 14511 standard, and the COP is above 3. Capacities up to 360 kW are available on request.

AFRICHILLER models

Model Capacity Compressors Refrigerant Steps Fans (mm) Water flow (m³/h)
AFRICHILLER 20 20 kW 1 × SZ100 R407C on/off 2 × Ø 500 3.4
AFRICHILLER 40 40 kW 1 × SZ185 R407C on/off 2 × Ø 630 6.9
AFRICHILLER 80 80 kW 1 × SZ380 R407C on/off 2 × Ø 800 13.8
AFRICHILLER 80 80 kW 2 × SZ185 R407C 50 and 100% 2 × Ø 800 13.8
AFRICHILLER 120 120 kW 2 × SZ380 R134a 50 and 100% 4 × Ø 800 20.6
AFRICHILLER 120 120 kW 3 × SZ185 R407C 33, 66 and 100% 4 × Ø 800 20.6
AFRICHILLER 160 160 kW 2 × SZ380 R407C 50 and 100% 4 × Ø 800 27.5
AFRICHILLER 160 160 kW 4 × SZ185 R407C 25, 50, 75 and 100% 4 × Ø 800 27.5
AFRICHILLER 240 240 kW 3 × SZ380 R407C 33, 66 and 100% 6 × Ø 800 41.3
AFRICHILLER 320 320 kW 4 × SZ380 R407C 25, 50, 75 and 100% 8 × Ø 800 55.0

Cooling capacity with water from 12 to 7 °C and 38 °C air. Water flow for a 5 °C difference. At 80, 120 and 160 kW, two versions: fewer compressors, or more capacity steps and backup circuits. The 120 kW is available with R134a (2 × SZ380) or R407C (3 × SZ185). The other models can also be built with R134a, at a lower capacity: we calculate it for you.

Dimensions

Model L × W × H (mm) Empty weight
AFRICHILLER 160 3100 × 2300 × 2450 1650 kg
AFRICHILLER 240 4650 × 2300 × 2450 2450 kg
AFRICHILLER 320 5650 × 2300 × 2450 3200 kg

Dimensions of the standard versions, without options. Other models: on quote.

Standard equipment

  • Danfoss scroll compressors on anti-vibration mounts, with discharge check valve, crankcase heater and discharge temperature sensor.
  • One refrigerant circuit per compressor, with high and low pressure sensors, filter drier and sight glass.
  • Electronic stepper expansion valve on each circuit, or thermostatic depending on the configuration.
  • Oversized V-shaped air-cooled condenser, copper tubes and aluminium fins; epoxy-coated fins as an option.
  • Shell and tube evaporator with separate circuits, tolerant to fouling; stainless steel plate heat exchanger possible.
  • Power and control panel, with thermal and magnetothermal protection of compressors and fans, and phase control relay.
  • Danfoss electronic controller.
  • Water pump and hydraulic circuit.

Options

  • Second standby water pump, with its hydraulic circuit.
  • Variable-speed EC fans.
  • Storage tank in galvanized or stainless steel.
  • Secondary pumping station with a frequency inverter on the pump.
  • Inverter compressors (variable speed).
  • Glycol water, heat recovery, reinforced version for 50 °C air.
  • R290 (propane) with Danfoss DSN compressors, designed for chillers.

Why scroll?

  • Efficiency: the scroll compressor has few moving parts and excellent efficiency at air conditioning conditions.
  • Quiet and compact: low vibration and a small footprint, suited to roofs and the courtyards of hotels or buildings.
  • Step control: several compressors in parallel, and the inverter option for continuously variable capacity.
  • Refrigerants: R407C or R134a with the Danfoss SY and SZ series, R290 (propane) with the DSN series, designed by Danfoss for chillers and heat pumps.

For higher capacities or continuous duty, see our Bock reciprocating chillers and Bitzer screw chillers, the 20 to 1000 kW water chiller page comparing the three technologies, and the chillers category.

Afric Froid, maker of the AFRICHILLER

Afric Froid designs, builds, installs and services its AFRICHILLER water chillers in Tunisia, Algeria, Senegal and Ivory Coast. Choose a model below or tell us the application, the flow, the water temperatures and the maximum outdoor temperature: we will send you a proposal and a quote.

Additional information
ModelAFRICHILLER 20 – 1 × SZ100, AFRICHILLER 40 – 1 × SZ185, AFRICHILLER 80 – 1 × SZ380, AFRICHILLER 80 – 2 × SZ185, AFRICHILLER 120 – 2 × SZ380, R134a, AFRICHILLER 120 – 3 × SZ185, R407C, AFRICHILLER 160 – 2 × SZ380, AFRICHILLER 160 – 4 × SZ185, AFRICHILLER 240 – 3 × SZ380, AFRICHILLER 320 – 4 × SZ380